|
Post by Prometheus on Sept 22, 2003 11:43:53 GMT -5
Cant believe this thread hasnt been started yet! Sheesh. Anyways as everyone knows the best way to get stoned of your face is to get as much THC into your lungs as fast as possible and there reallly isnt a better way than bongs or hydraters. So, as I know plenty of you smoke da ganja Id like to hear your ideas for possible bongs, hear tales of the best bong you've made or seen and also see any pics you have of home made Tubes of Joy. Ill start by explaining how to make the best bong Ive ever made.
You will need: 1xScrewdriver 1xPringles Can 2xJoints
[glow=red,2,300]Step 1[/glow] Remove the lid and try to stop yourself from popping. I advise you dont eat the Pringles but keep them for the inevitable Munchies that come with this bong.Take your screwdriver and proceed to punch a hole in the middle of the can. It must penetrate through one side but not the other.
[glow=red,2,300]Step 2[/glow] Using the same screwdriver come vertically down from the first hole to near the end of the can. Here you will place 2 punctures that form into one hole.
[glow=red,2,300]Step 3[/glow] Build your joints. I suggest using the 3-skin method described somewhere else on this board. When you have 2 nice spliffs ready proceed to wrap another skin around the roach areas of the joints so that they end up looking like the barrel of a shotgun.
[glow=red,2,300]Step 4[/glow] Insert said spliff into the hole at the end of the can. If youre not a good Jay builder and youre roach is too wide to fit the hole use your screwdriver to increase the radius of said hole. If the roach is too small use cardboard from a cereal box to fill the gap.
[glow=red,2,300]Step 5[/glow] Blaze the bad boy up. Place your face into the open end of the can and suck.As you do cover the hole in the middle of the can. When the can is full, release your breath cover the can so no smoke escapes and then proceed to clear the can of smoke.
[glow=red,2,300]Step 6[/glow] Name your bong. Ours was called Peter.
Id advise everyone to try this it is AMAZING Happy smoking guys.
|
|
|
Post by D°©tª·D [DD] on Sept 22, 2003 16:38:59 GMT -5
When smoking a contraption, and you want all the smoke into your lungs in a short a time as possible, the "rush hole" should be as far away from the mouth-piece as possible. Therefore, you are only sucking in the contents between the very bottom and top of the bottle, rather than clearing half and then taking half with a lungful of air.
The best bong we have ever made was around 1 meter long and the main tube was roughly 20cm. It was a mains water-pipe for under the road, made out of solid plastic. The plastic itself was around 1cm thick, and we found a bottle which happened to fit perfectly into the hole. We continued to cut the bottle in half, putting the half with the neck and screw-on lid on one end and the bottom half on the other. We then used sillicone to seal the two half bottles into the two ends. We put a hole in the bottom half of the bottle, so when our stem was in and the whole thing was siting at roughly 45 degrees, the stem was vertical. We then put some water and ice cubes in the bottom. ---| |--- --/---\-- -|-----|- -|-----|- -|-----|- -|-----|- -|___|- --|__|-
It looks something like that... dashes represent the aura of awesomeness which surrounded it.
Usually I prefer not to smoke up out of household made bongs as the plastic which they are nearly always made from is dodgy when heated up. I always like to have my little glass bong close to me. I had a credit card pipe too (which cost me fuckin' £32) and it was the ultimate smoking tool, but I have a feeling my mum stole it last year... bitch.
|
|
|
Post by KaRMa on Sept 22, 2003 22:52:37 GMT -5
i have always wanted to try a double-bubbler. you make an exit line from a standard water bong and put it into another. this just makes another chamber, more filtration, and i dont know, more fun i assume. i plan on making one in the near future. i usually just use a metal bat made to look like a cig or my friend's glass pipe for convenience.
EDIT: has anyone had any luck with waterfalls? ive tried a few times but the water either comes out too fast or not fast enough.
|
|
|
Post by D°©tª·D [DD] on Sept 23, 2003 7:12:40 GMT -5
When making a waterfall, burn a hole in a kinda oval shape, which your thumb fits into perfectly. With this, you can let out as much or as little water as you like by sliding your thumb back and forth over the hole. The best way to do it is to let a little water out until your weed is burning well, then more and more until it is blazing as well as it is going to be and you can let it all out. I always re-cover the hole when there's around 2" of water in the bottom of the bottle and take in the smoke with this water remaining, so it bubbles.
|
|
|
Post by Prometheus on Sept 23, 2003 10:11:21 GMT -5
That sure is one hell of a bong DD. Nice Aura too. Ive had great success with waterfallls in the past they are lethal. And I use the same method as DD a thumb hole. Not sure about youre twin bottle idea though Ill try it this weekend and let you know if it's any good. As for the credit card pipe Ive seen them for sale in a local smoke shop for like 25 yo-yos are they worth it? Can you only smoke weed with them or hash too cos its nigh on impossible to get weed down south.
|
|
|
Post by D°©tª·D [DD] on Sept 23, 2003 16:49:39 GMT -5
I only smoked resin with it... the weed supply is pretty weak up North too.
|
|
|
Post by Prometheus on Sept 24, 2003 7:32:26 GMT -5
I got the guy behind the counter to give me a demo of how it works but my mind was ruined at the time so I didnt understand him. Its really small though. Is it exactly like hitting a bong?
|
|
|
Post by D°©tª·D [DD] on Sept 24, 2003 7:51:39 GMT -5
No... it's like an incredibly smooth pipe. It consists of two pieces of metal, one of which is roughly 2mm thick and the size of a credit card. on one side of this is a valley of small grooves and indents, one of these grooves goes the whole way to one end of the card. Then a thinner, smaller piece of metal is placed over this grooved area and held in place by a number of magnets, making it totally airtight. You then load up the bowl on the top of the card and suck from the opposite end. It needs cleaned regularly, but all you need to do is take the two pieces apart and clean them with warm water, and it's as if you have a brand new pipe. I still have no idea where mine went...
|
|
|
Post by Stone on Sept 24, 2003 12:10:25 GMT -5
Nobody can deny the Shesha is the best bong EVER!
|
|
|
Post by ZBoxDemon on Sept 24, 2003 17:59:28 GMT -5
I just thought of this weird idea. What about a stone bong (no pun intended, literally one from a rock). Yeah it sounds dumb, but it would seem pretty cool to hollow out a rock and use one for a bong .
|
|
|
Post by DevourThePain on Sept 25, 2003 23:29:34 GMT -5
OK... is this south to which you guys refering to the southern areas of the united states? if thats the case then you guys just dont know where to get it. I smoked up about a week ago and the guy i smoked up with had a qp... and an ounce of KB. 2 bowls of kb and a blunt of hydro between 3 people.. damn i was FUCKED. i made a bong out of a glear class vase too... the smoothest water bong ive ever made besides the face mask one that got stolen...
|
|
|
Post by Stone on Sept 26, 2003 17:29:09 GMT -5
We mean the South of Ireland. Otherwise known as the Republic. It's the part not held under the tyranny of British Imperialism.
|
|
|
Post by KaRMa on Sept 27, 2003 21:09:35 GMT -5
any word on the "doubler" prom? i wish i could make one, its just too obvious for a mother that "cleans" my room
|
|
|
Post by Prometheus on Sept 29, 2003 5:22:56 GMT -5
Hehe I bunked off college Thursday (thats why I havent posted in like 4 days) and all I did was smoke sheesha and try to make bongs. Unfortunately I suck big fat chunky ass when comes to DIY. We took a regular coke bottle and melted a hole big enough to fit another coke bottles mouth piece into. Inserted said mouth piece. Then we took another bottle Lucozade this time cos its fatter. inserted that into the second bottle. Then we were gonna make it into a waterfall but we just CBA so we burned a hole for a spliff. It toked fairly shit and I put it down to the fact that there were too many unfilled gaps. How exactly do you guys fill air gaps when building bongs?? Duct tape??
|
|
|
Post by D°©tª·D [DD] on Sept 29, 2003 18:00:57 GMT -5
I have used everything imaginable. Silicone from a gun, Blu-tac and used chewing gum all work quite well. Tape is a bad idea as air always seems to get in somewhere.
|
|